LED Technologies
Excellence
in Lighting
Solutions
Designers and
Manufacturers
LEDs are the
light of the future.
----------------------------------------------------------------------------------------------------------------
Interior Lamps - 4 Lengths Available
These lamps are interior only, using white
SMD LEDs with high light output and a 120° light spread. Output equivalent to a
10 watt, 18 watt, 30 watt and 60 watt globe.
Low profile design for small spaces, an
unobtrusive yet stylish look.
1016
- 12 volt
1016/24
- 24 volt
100mm length
1031
- 12 volt
1031/24
- 24 volt
150mm length
1061
- 12 volt
1061/24
- 24 volt
300mm length
10121
- 12 volt
10121/24
- 24 volt
600mm length
----------------------------------------------------------------------------------------------------------------
Combination Lamp - 100mm x 100mm x 22mm
These lamps are fully submersible, rust
proof, shock resistant and feature our square lens pattern with 8 high
brightness LEDs.
101BAR2
- 12 volt
Blister of 2
----------------------------------------------------------------------------------------------------------------
Combination Lamp - 150mm x 80mm x 24mm
These lamps are fully submersible, rust
proof, shock resistant and feature our square lens pattern with 8 high
brightness LEDs.
151BAR2
- 12 volt
Blister of 2
151BARLP2
- 12 volt
Stop/Tail
Indicator
Reflector
Licence plate lamp
----------------------------------------------------------------------------------------------------------------
Combination Lamp - 250mm x 80mm x 24mm
These lamps are fully submersible, rust
proof, shock resistant and feature our diamond lens pattern. The circuit board
is fully encased in resin with corrosion protected tinned copper wiring. Same
lens design as our popular 150 series.
250ARWM
- multi volt
Stop/Tail
Indicator
Reverse
Reflector
----------------------------------------------------------------------------------------------------------------
Combination Lamp - 275mm x 100mm x 22mm
These lamps are fully submersible, rust
proof, shock resistant and feature our diamond lens pattern. The circuit board
is fully encased in resin with corrosion protected tinned copper wiring.
Specially designed male & female 4 pin plugs, compatible with the plug in and
drive away cable system.
275BAR2 - 12 volt
Stop/Tail Indicator Reflector
----------------------------------------------------------------------------------------------------------------
Combination Lamp - 275mm x 100mm x 33mm
275GARWM
- multi volt
Stop/Tail
Indicator
Reverse
Reflector
----------------------------------------------------------------------------------------------------------------
Licence Plate Lamps - 65mm x 30mm
The 30 series licence plate lamps are
fully submersible, shock resistant and are suited for the budget conscious
consumer. Can also be used for general illumination.
30BLM
- multi volt
Blister of 2
----------------------------------------------------------------------------------------------------------------
Licence Plate Lamps - 76mm x 42mm x
30mm
The 35 series licence plate lamps are
fully submersible and shock proof.
35BLM
- multi volt
35BLM1P
- multi volt
1 metre of cable with plug
----------------------------------------------------------------------------------------------------------------
Licence Plate Lamps - 375mm x 173mm x
25mm
The licence plate frame allows the licence
plate to be fitted underneath the two licence plate lamps all in one housing.
Comes with 1 metre of cable ending in a plug which clips into the back of the
100, 150 and 275 series Generation II lamps.
LP1 - 12 volt
----------------------------------------------------------------------------------------------------------------
Water Proof Colour Lamps - 58mm x 35mm
x 21mm
Marker Lamps - 58mm x 35mm x 21mm
The 35 series courtesy lamps are fully
submersible, shock resistant and feature our hexagonal lens pattern. Slimline
design. Individual clip in lenses
for easy surface mount with no visible screws.
35AM
- multi volt
Orange
35RM
- multi volt
Red
35WM
- multi volt
White
35ARM
- multi volt
Side marker Red & Amber when illuminated
----------------------------------------------------------------------------------------------------------------
Reflex Reflectors - 70mm x 30mm x 6mm
ADR compliant for both horizontal or
vertical mount. Highest quality adhesive tape used for secure and lasting
application.
7030A
Amber Reflex Reflector
7030R
Red Reflex Reflector
7030W
White Reflex Reflector
----------------------------------------------------------------------------------------------------------------
Reflex Reflectors with Mounting Bracket
93mm x 35mm x 7mm
ADR compliant for both horizontal or
vertical mount. Supplied in a black mounting bracket.
7035R
Red Reflex Reflector
7035A
Amber Reflex Reflector
7035W
Amber Reflex Reflector
----------------------------------------------------------------------------------------------------------------
Combination Lamp - 188mm x 100mm x 28mm
The 80 series lamps are fully submersible,
rust proof and shock resistant and feature our hexagonal pattern lens. The rear
of the circuit board is fully encased in resin. Individual clip in lenses for
easy replacement.
80BARM - multi volt
Stop/Tail
Indicator
----------------------------------------------------------------------------------------------------------------
Combination Lamp - 278mm x 100mm x 28mm
The 80 series lamps are fully submersible, shock resistant
and feature our hexagonal lens pattern. The rear of the circuit board is fully
encased in resin. Individual clip in lenses for easy replacement, surface mount
with no visible screws. Specifically designed for trailers or small sized
commercial vehicles.
80BARR - 12 volt
80BARRM - multi volt
Stop/Tail/Indicator
----------------------------------------------------------------------------------------------------------------
80BARW - 12 volt
80BARWM - multi volt
Stop/Tail/Indicator/Reverse
----------------------------------------------------------------------------------------------------------------
Combination Lamp - 100mm x 100mm x 28mm
The 80 series lamps are fully submersible,
shock resistant and feature our hexagonal lens pattern. Specifically designed
for trailers or small sized commercial vehicles. Individual clip in lenses allow
easy surface mount with no visible screws.
80BSTIM - multi volt
Stop/Tail
Indicator
----------------------------------------------------------------------------------------------------------------
Square Single Lamp - 100mm x 100mm x
28mm
80WM - multi volt
Reverse
----------------------------------------------------------------------------------------------------------------
Load Resistors
Dummy load resistors designed to draw the
same current as a 21 watt globe. Can be used on vehicles that have electronic
components that are not LED compatible. Note; resistor can reach 170° celsius,
must be mounted onto metal surface.
LR12/2 - 12 volt
LR24/2 - 24 volt
Resistor wiring diagram
----------------------------------------------------------------------------------------------------------------
#
View the complete LED catalogue here:-
LED Autolamps
Catalogue
----------------------------------------------------------------------------------------------------------------
at our on-line shop to locate and order your LED Autolamps
Products
quickly and easily!
------------------------
Our New Website with On-line Ordering will be available soon.....
Call 02 6925 3777 or e-mail
sales@noelsautoparts.com.au now and we can help with any
current requirements.
We look forward to your order, If
you need help don't hesitate to send us an E-mail.
If you are an extensive user or a part
time user of electrical products then LED Autolamps products are for you. See our huge
range in the latest product catalogue now available.
Being one of the largest LED
Autolamps wholesalers in Australia you
are sure to get what you want at the price you want. Bulk price deals available
upon request.
Want to know more, please contact Noel's Auto Parts
